Saturday, August 16, 2014

How to disable Autoconfiguration IPv4 Address in Windows 2012 Server


This issue I saw in Windows 2012 Sever and got to  know that this can be seen in Windows 2008 and Windows 7 PC’ also. hope below steps will help you to resolve the IP Address conflicting issue in your virtual environment.

When you enter Ipconfig /all command you will see something like this.

C:\Windows\system32>ipconfig /all


First you need to check the ip version 4 interfaces and the interface ID numbers. for that you can type,

C:\Windows\system32>netsh interface ipv4 show inter


Now you know your Ethernet interface ID is no 12. Then you can run below mentioned command.

C:\Windows\system32>netsh interface ipv4 set interface 12 dadtransmits=0 store=persistent


After that you need to  restart your Server and once it boot up, check the network settings.

C:\Windows\system32>ipconfig /all


Now Your server will work with the network settings which you have entered.

After restarting your server still if you are getting the Same error. you can do a DHCP service restart by going in to Services (Type Services.msc  in CMD) then restart the DHCP Service.



Hope this helps you.. Smile


Amu said...

Hi , Thanks for your post, really it's more helpful me to fix the issue where i stuckup and googling for the solution.:)

Unknown said...

Thank you, this tip has saved me a lot of time. (Windows Server 2012 R2)

paulg1701 said...

Excellent post. Your tip helped me solve this problem after 2 hours of working on it.

Matei Baniceru said...

thanx mate !

that's a very good one !

I was experiencing the issue on a 2012 Std Domain Controller :)

Matei Baniceru